Description
Accurately position, quickly locate and securely fasten tilt-up panel braces
The Brace Insert has wire legs, welded to a coil insert, with a disposable plastic plug. The wire legs have plastic feet to prevent corrosion at the concrete face. The plastic plug has antennas to locate the insert after concrete placement. The number and location of Brace Inserts will vary based on the dimensions of each tilt-up panel. Other insert sizes, including fractional dimensions, are available on request.
When the disposable plastic plug is located and removed from the tilt-up panel, the coil insert is exposed, providing the anchor point for subsequent lifting and/or bracing.
Brace Insert with Plug* (Bolt sold separately)
| Part No. | Description | SWL** |
|---|---|---|
| SBBI345 | Brace Insert 3/4″x5″ wPlug | 7,200 lbs. |
| SBBI346 | Brace Insert 3/4″x6″ wPlug | 9,600 lbs. |
| SBBI34612 | Brace Insert 3/4″x6-1/2″ wPlug | 9,900 lbs. |
| SBBI34714 | Brace Insert 3/4″x7-1/4″ wPlug | 10,200 lbs. |
| SBBI348 | Brace Insert 3/4″x8″ wPlug | 11,600 lbs. |
| SBBI34812 | Brace Insert 3/4″x8-1/2″ wPlug | 11,600 lbs. |
| SBBI34914 | Brace Insert 3/4″x9-1/4″ wPlug | 11,600 lbs. |
| SBBI3410 | Brace Insert 3/4″x10″ wPlug | 11,600 lbs. |
| SBBI341114 | Brace Insert 3/4″x11-1/4″ wPlug | 11,600 lbs. |
| SBBI3412 | Brace Insert 3/4″x12″ wPlug | 11,600 lbs. |
* Distance from edge is minimum 12” or loads must be reduced.
** Safe Working Load (SWL) based on 2:1 safety factor @ 3,000 psi.
The Inverted Brace Insert is designed for tilt-up panels where the anchor point for bracing is located on the bottom side of the panel.
Inverted Brace Insert with Plug* (Bolt sold separately)
| Part No. | Description | SWL** |
|---|---|---|
| SBIBI346 | Inverted Brace Insert 3/4″x6″ wPlug | 9,000 lbs. |
* Distance from edge is minimum 12” or loads must be reduced.
** Safe Working Load (SWL) based on 2:1 safety factor @ 3,000 psi.
Reviews
There are no reviews yet.